Cresta Leisure Showroom

Cresta Leisure Showroom
Cresta Leisure Showroom, Dorchester, Dorset

Monday, 14 January 2013

Spa BioFilm



Spa  Bio Film - The Basics

Is it time to deep clean your Spa?

If you have done nothing to remove the biofilm or keep it from forming on your spa, then be assured you have biofilm on every surface, and it is very difficult to remove once it has formed.
Despite best efforts to keep a spa clean, if not properly treated then over time biofilm will start to build up. This can be particularly prevalent in the pipe work, where the chlorine and spa chemicals have reduced exposure.
Biofilm contains bacteria, dirt, mould and often viruses or parasites. It grows in the nooks and crannies within the plumbing systems and jets and forms a slippery film. 
Biofilm Process


Why is it necessary to remove Biofilm?

Even well maintained tubs will accumulate biofilm deposits and attract ‘nasties’. This build up provides a breeding ground of potentially dangerous organisms to your health. It will also reduce the performance of the spa as the pipe work and jets become restricted.

A spa with immaculate plumbing results in cleaner, clearer, fresher water with better circulation.

Don’t Panic!

Firstly, Biofilm builds slowly in well maintained spas. We would recommend that during your usual emptying rotation a ‘spa and hot tub cleaner’ is used. This will remove oils and soap deposits and assist in reducing the build up of BioFilm.
For a really deep clean, which should be done every 12-18 months depending on bather use, you should use a Bio Film eliminator (Chlorine Dioxide). This is a more aggressive and effective cleaner and the results are often startling when used on older spas.

Your spa can react like this when treated with a Biofilm eliminator as the slime film and deposits are released from the pipe work, heater and pump internals. Once removed, the spa is then polished.


Deep Clean Makeover for your Spa

Cresta Leisure offers the following full treatment service:
  • Prepare spa for deep clean
  • Apply Bio Film Eliminator
  • Where possible we will check inside the cabinet and inspect O-rings and tighten any unions
  • Clean filter, wash down cabinet and cover, treating cover with a UV protector
  • Empty and rinse Spa
  • Polish Internal ShellRefill
  • Balance and commission

No comments:

Post a Comment